|
Application OZFLEX covers approximately 40 - 50 ridge caps per 10 litres. 25 lin/mtres of ridging Per 10 litre bucket 1. Point approximately 1 meter of ridge capping and trowel to a steeled finish. Lubricate trowel with water. 2. Apply up to 5mm thick (greater thickness increases drying time, sagging and cost). Collars should be conservative and just sufficient to seal the cap overlap. 3. Weep holes should be put in before curing has progressed too far. 4. Sponging is not recommended except for bed and point gables. Thin with water to a slurry and sponge on. |